The H Series Dew Point Sensor is a portable / hand-held sensor. It measures dew point, pressure, temperature and pressure dew point of compressed air and inert gases (argon, carbon dioxide, carbon monoxide, helium, hydrogen, nitrogen and oxygen). The H Series Dew Point Sensor is best suited to temporary measurements and is ideal for service technicians and auditors.
Important
- A minimum flow rate of > 2L/min is required for the sensor to read accurately
- The sensor must be installed in an upright position, after the dryer.
- Incorrect installation can damage the sensor and void the warranty. If you aren’t sure how to install, please contact us. Full installation instructions are available in the User Manual.
Dew Point Sensor Pack
- Hand held dew point sensor
- Measurement chamber
- Teflon tube
- Quick connect fitting
- Battery charger
- Hard carry case
- Calibration certificate
- User Manual
- 12 month warranty
Warranty & Calibration
12 month warranty
Calibration is recommended every 2 years (provided the sensor is not exposed to relative humidity above 85%).
Annual calibration is required if the sensor is exposed to relative humidity above 85%.
Accessories
Accessories such as mechanical and electrical fittings are available on the Accessories page.
Other information
Part Numbers: DEH100001, DEH200001
Please refer to our Terms and Conditions of Sale.