Menu Close

Mini Flow Meter for Point of Use

Price range: USD $546 through USD $1,084

Mini flow sensor, ideal for low flow, small pipes and point of use measurements. Measure instantaneous flow and cumulative flow

Pipe Sizes: DN3 to DN40

Pipe Connection: NPT or G thread

Accuracy: ±1.5% reading, ±0.3% full scale

Output: Modbus (RS485) and 4-20mA

Power Requirement: 24VDC

Application
• Clean and dry compressed air and inert gases
• Point of use measurements
• Manufacturing, industrial and pharmaceutical use
• Temporary or permanent installation

United States dollar ($) - USD
  • Australian dollar ($) - AUD
  • United States dollar ($) - USD
  • Euro (€) - EUR
  • Canadian dollar ($) - CAD
  • Pound sterling (£) - GBP
  • Singapore dollar ($) - SGD

The mini flow meter is ideal for low gas flow, small pipes and point of use applications. The flow meter is based on the principle of thermal diffusion, directly measuring the mass flow without the need for pressure and temperature compensation.

Important

Incorrect wiring or installation can give false readings, damage the sensor and void the warranty. If you aren’t sure how to install or wire the sensor, please contact us. Full installation and wiring instructions are available in the User Manual.

Mini Flow Meter Pack

  • Inline flow meter
  • Calibration certificate
  • User Manual
  • 12 month warranty

Warranty & Calibration

12 month warranty

Calibration is recommended every 2 years (provided the sensor is not exposed to relative humidity above 85%).
Annual calibration is required if the sensor is exposed to relative humidity above 85%.

Accessories

Accessories such as mechanical and electrical fittings are available on the Accessories page.

Other Information

Please refer to our Terms and Conditions of Sale.

HS Code

902680

Features

  • Style:  Inline – NPT or G thread
  • Technology: Thermal diffusion
  • IP Rating: IP54
  • Pipe Sections:
    • NPT: DN3, DN6, DN10
    • G-Thread: DN10, DN15, DN20, DN25, DN32, DN40
  • Gas Pressure: up to 16 bar (232 psi)
  • Gas Temperature: -20 to +60°C (-4 to +140°F)
  • Accuracy: +/-1.5% reading, +/-0.3% full scale
  • Power Requirement: 24VDC
  • Outputs: Modbus RTU and 4-20 mA
  • Display: Digital display
  • Data Logging: No
  • Bi-directional: No
  • Measure: Instantaneous flow and cumulative flow
  • Other Features:
    • Integrated digital adaptive signal processing technology can effectively suppress random errors.
    • Fully isolated electrical structure completely filters out interference.
    • Integrated temperature measurement sensor is based on the micro-electromechanical system (MEMS) made of CMOS semiconductor technology to achieve high-precision measurements
    • Ultra-wide Turndown Ratio, 1:100
  • Applications:
    • Clean and dry compressed air and inert gases
    • Point of use measurements
    • Manufacturing, industrial and pharmaceutical use
    • Temporary or permanent installation
    • Indoor use
  • Warranty: 12 months

Downloads

User Manual

Product Flyer