Menu Close

Accessories

Accessories for compressed air and gas systems including: cables, M12 connectors, power adapters, hot tap drills, BSP-NPT adapters, stainless steel fittings.

Showing all 9 resultsSorted by price: high to low

  • Hot tap drill with drill bitHot tap drill

    Hot Tap Drill

    Price range: USD $916 through USD $1,901

    A hot tap drill is a universal tool that allows you to manually install a connection point on pressurized or unpressurised pipes. Note: Hot tapping can be dangerous and should be performed by experienced technicians only.

    Drill Depth: Up to 200 mm (7.87”)

    Drill bit Diameters
    • 8.5 mm, 14.5 mm, 19.5 mm, 24.5 mm
    • Corresponding ball valve size: 1/4”, 1/2”, 3/4”, 1”

    Drill Bit Material: Cobalt-containing high-performance high-speed steel HSS / E

    Working Gas Pressure Range: Up to 20 bar (290 psi)

    Working Temperature: -50°C to +200°C (-58°F to +392°F)

    Applications
    • Manufacturing and industrial use
    • Temporary or permanent installation

    Select options
  • Hot tap clampHot tap clamp with ball valve

    Hot Tap Clamps

    Price range: USD $359 through USD $592

    Compressed Air Alliance’s Hot Tap Clamps are idea for use when a take off or socket needs to be added to the pipework while under pressure. Each set comes with a clamp and a ball valve. The clamps are easy to install around the pipe and form a tight seal.

    Clamp Sizes
    To suit pipe ODs from 45 mm (1.8”) to 240 mm (9.4”)

    Ball Valve Size
    1/2” valve or 3/4” valve

    Working Gas Pressure Range
    Up to 1.6 MPa (16 bar, 232 psi)

    Working Temperature
    0°C to 60°C (+32°F to +140°F)

    Clamp Material
    Clamp shell, nuts and washers are made from 316 stainless steel
    Gasket is made from Nitrile rubber

    Applications
    • Manufacturing and industrial use
    • Temporary or permanent installation

    Select options
  • Flow meter head protectionFlow Meter Enclosure size

    Flow Meter Enclosure

    USD $176

    Transparent flow meter enclosure, suitable for use with Compressed Air Alliance Flow meters. Protect the flow meter head from water, dust and other damage. Quick installation. Easy to disassemble.

    Material: Transparent polycarbonate shell

    IP Rating: IP66

    Ambient Temperature Range: -20°C to +80°C (-4°F to +176°F)

    Add to cart
  • 24vDC power adapterPower Plugs

    Power Pack

    USD $76

    24vDC Power Pack with M12 connector for use with Compressed Air Alliance’s dew point, flow, pressure and temperature sensors

    • Interchangeable plugs – Australia, UK, Europe and USA
    • 24vDC output – M12, 5 pin female connector
    • 100-240vAC input (50/60 Hz)
    • 50W
    • 2.1 Amp
    • 1.7m cable length
    Add to cart
  • Data cable with M8 connectorCable with 1 M12 female connector and 1 M12 male connector

    Cables

    Price range: USD $21 through USD $42

    5 wire sensor / instrument / data cables. Perfect for connecting sensors to 24vDC power, Modbus output, 4-20mA output, displays, SCADA systems and more.

    These cables can be used with our Data Acquisition System, Dew Point Sensors, Flow Meter, Pressure Sensors, Power Meters and Temperature Sensors.

    Applications

    • Manufacturing, industrial and pharmaceutical use
    • Permanent and temporary installations
    • Non-explosive environments
    Select options
  • M12 female connectorM12 male connector

    M12 Connector

    Price range: USD $15 through USD $42

    5 pin, M12 connectors. Perfect for connecting sensors to Modbus or 4-20mA cables and 24vDC power.

    The Y and Tee connectors are ideally suited to daisy chaining sensors together.

    Select options
  • Cable - HarnessPin assignment for M12 connectors

    M12 Harness

    USD $33

    M12 Harness / Joiner cable. Two x M12, 5pin Female connectors and 1 x M12, 5 pin Male connector. Perfect for daisy-chaining sensors. Connecting pneumatic sensors to 24vDC power, Modbus output, 4-20mA output, displays, SCADA systems and more.

    Standard Features

    • Rated Voltage: 125 V AC/DC
    • Wire Colours: Black, Grey, Blue, Brown, White
    • Unshielded
    • Cable Specification: N*0.34mm2
    • Cable Length: 1 meter per cable, 2 meters total
    • IP Rating: IP67
    • Ambient Temperature: -25 to +85°C
    • Outer Insulation (Jacket): Black PVC
    • A-Coded connectors – 2 x M12 5 pin female and 1 x M12 5 pin male

    Applications

    • Manufacturing, industrial and pharmaceutical use
    • Permanent and temporary installations
    • Non-explosive environments
    Add to cart
  • M8 to M12 Adapter CablePin assignment for M12 and M8 connectors

    M8 to M12 Connector

    USD $27

    M8 to M12 connector cable. 5 wires with an M8 female connector on one end and an M12 male connector on the other end. Perfect for connecting sensors to 24vDC power, Modbus output, 4-20mA output, displays, SCADA systems and more.

    Standard Features

    • Cable length: 0.15m
    • M8 female connector (B-coded) on one end
    • M12 male connector (A-coded) on the other end
    • Rated Voltage: 125 V AC/DC
    • Wire Colours: Black, Grey, Blue, Brown, White
    • Unshielded
    • Cable Specification: N*0.34mm2
    • IP Rating: IP67
    • Ambient Temperature: -25 to +85°C
    • Outer Insulation (Jacket): Black PVC

    Applications

    • Manufacturing, industrial and pharmaceutical use
    • Permanent and temporary installations
    • Non-explosive environments
    Add to cart
  • BSP to NPT Adapter

    BSP to NPT Adapter

    USD $21

    Stainless Steel (304SS) BSP to NPT adapter.

    1/2″ BSP female to 1/2″ NPT male thread.

    Perfect for use with Compressed Air Alliance’s flow meters.

    Add to cart