CAA Sensors
Showing 1–15 of 38 results
-
USD $9,381The permanent Oil Vapour & Dew Point Monitor is ideal for pharmaceutical, food, and beverage manufacturers. It monitors oil vapour, pressure dewpoint, pressure and temperature. It also gives the air purity class for oil vapour (ISO 8573-5) and moisture (ISO 8573-3).
Measurement Range:
- Oil Vapour: 0.001 to 5.000 mg/m³
- Dew Point: -110 to +20°C (166°F to +68°F)
- Pressure: 0 to 17 bar (0 to 246 psi)
- Gas Temperature: 0 to +50°C (32°F to +122°F)
ISO5873 Classes:
- ISO 8573-5 class for oil vapour
- ISO 8573- 3 class for moisture (dew point)
Data Output: 4-20mA, Modbus RS485
Power requirement: 100 to 240 VAC
Optional Display:
- 7″ touch screen display
- 25 GB of data storage, log up to 3,000,000,000 (3 billion) values
- Data output: 4-20mA, Modbus RS485, Modbus TCP or USB (csv file)
- 2 x alarm relay output channels (oil vapour & dew point)
Application
- Food & beverage, and pharmaceutical use
- Manufacturing and industrial
- Temporary or permanent installation
- Non-explosive environments
-
USD $9,381The Portable Oil Vapour & Dew Point Monitor is ideal for pharmaceutical, food, and beverage manufacturers. It monitors oil vapour, pressure dewpoint, pressure and temperature. It also gives the air purity class for oil vapour (ISO 8573-5) and moisture (ISO 8573-3).
Measurement Range:
- Oil Vapour: 0.001 to 5.000 mg/m³
- Dew Point: -110 to +20°C (166°F to +68°F)
- Pressure: 0 to 17 bar (0 to 246 psi)
- Gas Temperature: 0 to +50°C (32°F to +122°F)
ISO5873 Classes:
- ISO 8573-5 class for oil vapour
- ISO 8573- 3 class for moisture (dew point)
Data Storage: 25 GB of storage, log up to 3,000,000,000 (3 billion) values
Data output: Modbus RS485 or USB (csv file)
Alarm Relays: 2 x alarm relay output channels (oil vapour & dew point)
Power requirement: 100 to 240 VAC, Max 65 W
Application
- Food & beverage, and pharmaceutical use
- Manufacturing and industrial
- Temporary or permanent installation
- Non-explosive environments
-
USD $2,007 – USD $8,800Price range: USD $2,007 through USD $8,800The Vortex flow meter is perfectly suited for measuring the flow, pressure and temperature of gases and steam. Ideal for use in steam, wet gas and on the outlet of compressors. Optional ATEx rating for use in explosive areas.
Flow Range: 1.5 to 300 Nm/sec (5 to 931 ft/sec)
Pipe Sizes: DN15 to DN300
Accuracy: ±1.5% reading, ±0.3% full scale
Output: Modbus (RS485) and 4-20mA
Power Requirement: 18 to 30VDC / 10W@24V
ATEx Rating: Optional
Application
• Steam, compressed air and gas
• Compressor outlets
• Manufacturing, industrial and pharmaceutical use
• Temporary or permanent installation -
USD $5,250Ultrasonic flow meter for industrial and domestic water, sea water, heating and cooling water, and other clean liquids with minimal bubbles or solids. Measure real-time flow, accumulated flow, flow velocity and pipe temperature. Ideal for temporary or permanent installation.
Liquid Flow Range: 0.01m/s to 12m/s (0.03 ft/s to 40ft/s)
Pipe Sizes: DN25 to DN5000
Output: Modbus (RS485) and 4-20mA
Power Requirement: 24vDC
Applications
• Clean liquids with minimal bubbles or solids
• Manufacturing, industrial and pharmaceutical use
• Non-explosive environments -
USD $1,821 – USD $4,143Price range: USD $1,821 through USD $4,143ATEX rated thermal mass flow meter suitable for clean, dry gas. Ideal for harsh environments or outdoor installations. Measure flow, mass flow, consumption and gas temperature.
Flow Range: 0.1 to 250 Nm/s (0.3 to 820 ft/sec)
IP Rating: IP67
ATEx Rating: Optional
Pipe Sizes: DN15 to DN80
Accuracy: ±1.5% reading, ±0.3% full scale
Output: Modbus (RS485) and 4-20mA
Power Requirement: 18 to 30VDC / 5W@24VDC
Applications
• Outdoors or harsh environments
• Clean and dry compressed air and inert gases
• Manufacturing, industrial and pharmaceutical use
• Temporary or permanent installation -
USD $1,692 – USD $3,648Price range: USD $1,692 through USD $3,648Ultrasonic flow meter for industrial and domestic water, sea water, heating and cooling water, diesel oil, alcohol or other clean liquids with minimal bubbles or solids. Measure real-time flow, accumulated flow, flow velocity and pipe temperature. Ideal for temporary or permanent installation.
Liquid Flow Range: 0.1m/s to 5m/s (0.328ft/s to 16ft/s)
Pipe Sizes: DN6 to DN100
Output: Modbus (RS485) and 4-20mA
Power Requirement: 24vDC
Applications
• Clean liquids with minimal bubbles or solids
• Manufacturing, industrial and pharmaceutical use
• Non-explosive environments -
USD $2,376 – USD $2,948Price range: USD $2,376 through USD $2,948Outdoor thermal mass flow meter suitable for clean, dry gas. Ideal for harsh environments or outdoor installations. Measure flow, mass flow, consumption and gas temperature.
Flow Range: 0.1 to 250 Nm/s (0.3 to 820 ft/sec)
ATEx Rating: Optional
IP Rating: IP67
Pipe Sizes: DN20 to DN300
Accuracy: ±1.5% reading, ±0.3% full scale
Output: Modbus (RS485) and 4-20mA
Power Requirement: 18 to 30VDC / 5W@24VDC
Applications
• Outdoors or harsh environments
• Clean and dry compressed air and inert gases
• Manufacturing, industrial and pharmaceutical use
• Temporary or permanent installation -
USD $2,028 – USD $2,840Price range: USD $2,028 through USD $2,840Handheld / portable dew point sensor for compressed air and gases. Ideal for service technicians, auditors and temporary measurements.
Pressure Dew Point (PDP) Range
-60°C to +60°C (-76°F to +140°F) or
-110°C to +60°C (-166°F to +140°F)Gas Pressure Range: up to 17 bar (246 psi)
Dryer Types: Desiccant, membrane, drum, refrigerant or hybrid dryers
Gas Quality: Minimal contaminates (ie minimal oil, particles or water vapour)
Applications
• Auditors and technicians
• Manufacturing, industrial and pharmaceutical use
• Non-explosive environments -
USD $2,262 – USD $2,566Price range: USD $2,262 through USD $2,566Pitot Tube flow meter. Ideally suited to moist, dirty and high velocity compressed air and inert gas systems that contain some level of contamination. Measure flow, consumption, pressure and temperature.
Do not use Pitot Tube flow meters on compressor outlets. The pitot tube flow meter must have a filter or water separator between the compressor and flow meter.
Flow Range: 5 – 300 Nm/s (17 to 984 ft/s)
Gas Pressure Range: up to 17 bar (247 psi)
Pipe Sizes: DN25 to DN600
Accuracy: ±1.5% reading, ±0.3% full scale
Output: Modbus (RS485) and 4-20mA
Power Requirement:
• During start up: 18 to 30V DC ⁄ 24W@24V
• Normal operation: 18 to 30VDC / 6.5W@24VDCBi-directional: Optional
Applications
• Compressed air and gas systems
• Manufacturing, industrial and pharmaceutical use
• Temporary or permanent installation -
USD $1,975 – USD $2,489Price range: USD $1,975 through USD $2,489Electromagnetic flow meter for industrial and domestic water, sea water, heating and cooling water, wastewater and more. Measure real-time flow, accumulated flow, flow velocity and mass flow. Ideal for permanent installations.
Liquid Quality: Electrically conductive liquids
Pipe Sizes: DN15 to DN150
Output: Modbus (RS485) and 4-20mA
Power Requirement: 24vDC
Applications
• Manufacturing, industrial and pharmaceutical use
• Temporary or permanent installation
• Non-explosive environments -
USD $1,778 – USD $2,415Price range: USD $1,778 through USD $2,415The ATEX dew point sensor has a rugged design and an IP67 rating. Suitable for compressed air and gases. Measure pressure dew point (PDP), relative humidity (RH), temperature (°C, °F) and pressure (optional).
Dryer Types
- Desiccant, Drum, Hybrid, Membrane, Refrigerant dryers
Standard Features
- Minimum gas flow rate: > 1L/min
- IP Rating: IP67
- Accuracy: up to ±2%
- Outputs: Modbus RTU (RS485) and 4-20mA
- Display: 2.0” IPS LCD display with an ultra-wide viewing angle
- Alarm Relay: Yes
- Power Requirement: 16 to 30vDC
- Gas Types: Air, Argon, Carbon Dioxide, Helium, Hydrogen, Nitrogen, Natural Gas, Nitrous Oxide, Oxygen
Options
- ATEX rating
II 2G Ex db IIC T6 Gb- II 2D Ex tb IIIC T80°C Db
- Pressure Dew Point (PDP) Range:
- -60°C to +60°C (-76°F to +140°F) or
- -110°C to +20°C (-166°F to +68°F)
- Integrated pressure sensor
Applications
- Compressed air and gas systems
- Nitrogen systems
- Process gases
- Manufacturing, industrial and pharmaceutical use
- Permanent or temporary installation
-
USD $1,288 – USD $2,273Price range: USD $1,288 through USD $2,273Inline type, thermal mass flow sensor for clean, dry gas. Flange (DIN) or R-Thread pipe connection. Measure flow, mass flow, consumption and gas temperature.
Flow Range: 0.1 to 250 Nm/sec (0.3 to 820 ft/sec)
Pipe Sizes: DN15 to DN80
Pipe Connection: Flange or R-Thread
Accuracy: ±1.5% reading, ±0.3% full scale
Output: Modbus (RS485) and 4-20mA
Power Requirement: 18 to 30VDC / 5W@24VDC
Applications
• Compressed air and gas systems
• Manufacturing, industrial and pharmaceutical use
• Temporary or permanent installation -
USD $1,992 – USD $2,123Price range: USD $1,992 through USD $2,123Insertion type, thermal mass flow sensor for clean, dry gas. Good option where shutting down the system is difficult or impossible. Measure flow, mass flow, consumption and gas temperature.
Flow Range: 0.1 to 250 Nm/s (0.3 to 820 ft/sec)
Pipe Sizes: DN20 to DN600
Accuracy: ±1.5% reading, ±0.3% full scale
Output: Modbus (RS485) and 4-20mA
Power Requirement: 18 to 30VDC / 5W@24VDC
Application
• Manufacturing, industrial and pharmaceutical use
• Temporary or permanent installation -
USD $1,877 – USD $2,095Price range: USD $1,877 through USD $2,095HMI / Display for Multiple Sensors
HMI / display with multi-sensor data collection, logging, and graphical functions. View real time and historical data of multiple sensors in one easy to read unit. Export data to USB or output to your SCADA system via Modbus RTU (RS485) or Modbus TCP.
Standard Features
- 7” ultra-wide viewing angle LCD touch screen, high resolution data display
- Two isolated Modbus RTU (RS485) interfaces, supports up to 255 sensor inputs
- IP65 protection
- 25 GB of storage, log up to 2,000,000,000 (2 billion) values
- 2 x alarm relay output channels
- Outputs:
- Modbus RTU (RS485),
- Modbus TCP (Ethernet)
- USB Type-C
- Power requirement: 24 to 30 VDC
Options
- Panel Mount or Wall Mount
- 4 x Analogue channels [0 … 20 mA / 4 … 20 mA / 0 … 1 VDC / 0 … 10 VDC]
Applications
- Manufacturing, industrial and pharmaceutical use
- Temporary or permanent installation
- Non-explosive environments
-
USD $1,006 – USD $1,903Price range: USD $1,006 through USD $1,903Dew point transmitter with Alumina-Oxide sensor for compressed air, inert gases, nitrogen systems and hydrogen systems. Ideal for temporary or permanent installation.
Pressure Dew Point (PDP) Range
-80°C to +20°C (-112°F to +68°F), or
-110°C to +20°C (-166°F to +68°F), or
-120°C to +20°C (-184°F to +68°F),Dryer Types: Gas or compressed air systems with desiccant, membrane, drum or hybrid dryers.
Outputs: Modbus (RS485) and 4-20mA
Power Requirement: 10 to 30vDC, max 50 mA @ 24vDC
Applications
• Compressed air and gas systems, nitrogen systems, hydrogen systems, process gases
• Manufacturing, industrial and pharmaceutical use
• Non-explosive environments