Flow Meter - Gas and Steam

• 

  Flow Meter - Gas and Steam

  Vortex Flow Meter

  USD $2,007 – USD $8,800Price range: USD $2,007 through USD $8,800

  The Vortex flow meter is perfectly suited for measuring the flow, pressure and temperature of gases and steam. Ideal for use in steam, wet gas and on the outlet of compressors.

  Flow Range: 1.5 to 300 Nm/sec (5 to 931 ft/sec)

  Pipe Sizes: DN15 to DN300

  Accuracy: ±1.5% reading, ±0.3% full scale

  Output: Modbus (RS485) and 4-20mA

  Power Requirement: 18 to 30VDC / 10W@24V

  Application
  • Steam, compressed air and gas
  • Compressor outlets
  • Manufacturing, industrial and pharmaceutical use
  • Temporary or permanent installation

  Select options
• 

  Flow Meter - Gas and Steam

  Pitot Tube Flow Meter

  USD $2,262 – USD $2,815Price range: USD $2,262 through USD $2,815

  Pitot Tube flow meter. Ideally suited to moist, dirty and high velocity compressed air and inert gas systems that contain some level of contamination. Measure flow, consumption, pressure and temperature.

  Do not use Pitot Tube flow meters on compressor outlets. The pitot tube flow meter must have a filter or water separator between the compressor and flow meter.

  Flow Range: 5 – 300 Nm/s (17 to 984 ft/s)

  Gas Pressure Range: up to 17 bar (247 psi)

  Pipe Sizes: DN25 to DN600

  Accuracy: ±1.5% reading, ±0.3% full scale

  Output: Modbus (RS485) and 4-20mA

  Power Requirement:
  • During start up: 18 to 30V DC ⁄ 24W@24V
  • Normal operation: 18 to 30VDC / 6.5W@24VDC

  Bi-directional: Optional

  Applications
  • Compressed air and gas systems
  • Manufacturing, industrial and pharmaceutical use
  • Temporary or permanent installation

  Select options
• 

  Flow Meter - Gas and Steam

  Thermal Mass Flow Meter (Outdoor) – IP67

  USD $2,376 – USD $2,794Price range: USD $2,376 through USD $2,794

  Outdoor thermal mass flow meter suitable for clean, dry gas. Ideal for harsh environments or outdoor installations. Measure flow, mass flow, consumption and gas temperature.

  Flow Range: 0.1 to 250 Nm/s (0.3 to 820 ft/sec)

  IP Rating: IP67

  Pipe Sizes: DN20 to DN300

  Accuracy: ±1.5% reading, ±0.3% full scale

  Output: Modbus (RS485) and 4-20mA

  Power Requirement: 18 to 30VDC / 5W@24VDC

  Applications
  • Outdoors or harsh environments
  • Clean and dry compressed air and inert gases
  • Manufacturing, industrial and pharmaceutical use
  • Temporary or permanent installation

  Select options
• 

  Flow Meter - Gas and Steam

  Thermal Mass Flow Meter (Indoor)

  USD $1,992 – USD $2,372Price range: USD $1,992 through USD $2,372

  Insertion type, thermal mass flow sensor for clean, dry gas. Good option where shutting down the system is difficult or impossible. Measure flow, mass flow, consumption and gas temperature.

  Flow Range: 0.1 to 250 Nm/s (0.3 to 820 ft/sec)

  Pipe Sizes: DN20 to DN600

  Accuracy: ±1.5% reading, ±0.3% full scale

  Output: Modbus (RS485) and 4-20mA

  Power Requirement: 18 to 30VDC / 5W@24VDC

  Application
  • Manufacturing, industrial and pharmaceutical use
  • Temporary or permanent installation

  Select options
• 

  Flow Meter - Gas and Steam

  Inline Flow Meter (Indoor)

  USD $1,288 – USD $1,776Price range: USD $1,288 through USD $1,776

  Inline type, thermal mass flow sensor for clean, dry gas. Flange (DIN) or R-Thread pipe connection. Measure flow, mass flow, consumption and gas temperature.

  Flow Range: 0.1 to 250 Nm/sec (0.3 to 820 ft/sec)

  Pipe Sizes: DN15 to DN80

  Pipe Connection: Flange or R-Thread

  Accuracy: ±1.5% reading, ±0.3% full scale

  Output: Modbus (RS485) and 4-20mA

  Power Requirement: 18 to 30VDC / 5W@24VDC

  Applications
  • Compressed air and gas systems
  • Manufacturing, industrial and pharmaceutical use
  • Temporary or permanent installation

  Select options
• 

  Flow Meter - Gas and Steam

  Mini Flow Meter for Point of Use

  USD $546 – USD $1,084Price range: USD $546 through USD $1,084

  Mini flow sensor, ideal for low flow, small pipes and point of use measurements. Measure instantaneous flow and cumulative flow

  Pipe Sizes: DN3 to DN40

  Pipe Connection: NPT or G thread

  Accuracy: ±1.5% reading, ±0.3% full scale

  Output: Modbus (RS485) and 4-20mA

  Power Requirement: 24VDC

  Application
  • Clean and dry compressed air and inert gases
  • Point of use measurements
  • Manufacturing, industrial and pharmaceutical use
  • Temporary or permanent installation

  Select options
• 

  Flow Meter - Gas and Steam

  Compact Flow Meter for Point of Use

  USD $347 – USD $539Price range: USD $347 through USD $539

  Compact inline flow sensor, ideal for low flow, small pipes and point of use measurements. Measure instantaneous flow and cumulative flow in clean and dry compressed air and inert gases.

  Standard Features

  • IP Rating: IP40
  • Accuracy: ±3% full scale ±1 digit
  • Output: Modbus (RS485)
  • Display: Colour crystal display
  • Power Requirement: 24VDC

  Options

  • Pipe sizes for G thread: DN15 (1/2″)  to DN40 (1.5″)
  • Gas Types: Air, Carbon Dioxide, Carbon Monoxide, Nitrogen, Oxygen

  Applications

  • Point of use flow measurements
  • Manufacturing, industrial and pharmaceutical use
  • Permanent or temporary installation
  • Non-explosive environments

  Select options
• 

  Accessories

  Flow Meter Enclosure

  USD $176

  Transparent flow meter enclosure, suitable for use with Compressed Air Alliance Flow meters. Protect the flow meter head from water, dust and other damage. Quick installation. Easy to disassemble.

  Material: Transparent polycarbonate shell

  IP Rating: IP66

  Ambient Temperature Range: -20°C to +80°C (-4°F to +176°F)

  Add to cart
• 

  Accessories

  Cables

  USD $21 – USD $42Price range: USD $21 through USD $42

  5 wire sensor / instrument / data cables. Perfect for connecting sensors to 24vDC power, Modbus output, 4-20mA output, displays, SCADA systems and more.

  These cables can be used with our Data Acquisition System, Dew Point Sensors, Flow Meter, Pressure Sensors, Power Meters and Temperature Sensors.

  Applications

  • Manufacturing, industrial and pharmaceutical use
  • Permanent and temporary installations
  • Non-explosive environments

  Select options
• 

  Accessories

  BSP to NPT Adapter

  USD $21

  Stainless Steel (304SS) BSP to NPT adapter.

  1/2″ BSP female to 1/2″ NPT male thread.

  Perfect for use with Compressed Air Alliance’s flow meters.

  Add to cart